WOW, I cant believe its been 3 months since my last post, I have been so busy that time has flown by, been finishing off at college with the marking etc and getting ready for next term, time flies when you are enjoying yourself.
So, what's making me grumpy at the moment, BMW & Audi drivers, the one thing I have noticed over the last couple of years is that BMW drivers particularly are really shit drivers, they think they own the roads, Audi drivers are just as bad, cutting you up, over taking in dangerous places and forcing me to break so they can cut in, pulling out from a side road no matter how fast you are approaching them, those that know me know I get a little pissed off when in the car when it comes to shit drivers, I change from Mr Grumpy to Mr Very Angry, and yes I do suffer from road rage, I have lost count of the times I have got out of my car and threatened other drivers with death or even worse torture, I have also had quite a few actual fights, one in particular where I dragged a guy from his BMW and shoved his head under the front wheel of a lorry behind, the lorry driver was not amused, I bet the BMW driver will think again before he cuts me up again.
Anyway, the strange thing is this, 95% of the people I have confronted have been Eastern Europeans, now I know what your gonna say, but, sorry it's just the truth, I was quite shocked by the amount, so I did some research, Google etc then I checked YouTube for bad driving, O M F G, nearly all the videos are from Eastern Europe, WTF is wrong with these people? I know they love their cars, so why try and destroy them every time they get in them.
I think they should have to take driving lessons for 3 months when they get here and then have to take a test like everyone else written and practical. So until then the lead glove and escrema/Kali sticks will have to stay in the car, for the other 5%, learn to fucking drive, morons.
Sorry eastern Europeans, your women are beautiful but, your driving is SHIT.
Exciting things are happening in the work shop, as you know I make custom one off guitars, and have had problems getting some parts that I want customised to my specification, most of these are plastic of some type, so I decided enough is enough and I have ordered a 3D printer, the 'Ender 3' should be with me in the next couple of weeks, and I am very excited, however, my enthusiasm was dampened a little when I realised that I need to learn a couple of software programs, bugger, I have a memory problem and I am waiting for a diagnosis as to whats going on, but I struggle learning new things, so having ordered my Ender 3 I did some research and found the best software to use was Tinkercad, Fusion 360 and Cura for slicing, if you don't know what I am talking about, join the club because I not sure myself.
I have watched numerous YouTube videos on all three bits of software, Tinkercad is for kids, so I thought how hard can it be, well its great, makes 3D design simple, I have designed a couple of bits for my guitars, but the problem is the next day I can't remember how I did it, so every day I have to relearn it all again and thats a bitch.
Fusion 360 is a proper 3D piece of software as far as I can see but, I don't think I will ever get to use it as my brain keeps saying 'Fuck this I am switching off' but I will keep going, and Cura is just a case of setting up an imported file for printing, I can write down the settings in a book so I don't forget them, but I am determined to have a go and try to print my custom scratch plates and knobs. Watch this space.
You would think that after 3 months away from this blog that I would have loads to write about, but the truth is work 'College Stuff' has taken up most of my time, so boring really as no one has upset me for a while. I think they have got the message? However I am now on holiday for 5 weeks, so loads can happen, you never know.
Until next time.............................
So, what's making me grumpy at the moment, BMW & Audi drivers, the one thing I have noticed over the last couple of years is that BMW drivers particularly are really shit drivers, they think they own the roads, Audi drivers are just as bad, cutting you up, over taking in dangerous places and forcing me to break so they can cut in, pulling out from a side road no matter how fast you are approaching them, those that know me know I get a little pissed off when in the car when it comes to shit drivers, I change from Mr Grumpy to Mr Very Angry, and yes I do suffer from road rage, I have lost count of the times I have got out of my car and threatened other drivers with death or even worse torture, I have also had quite a few actual fights, one in particular where I dragged a guy from his BMW and shoved his head under the front wheel of a lorry behind, the lorry driver was not amused, I bet the BMW driver will think again before he cuts me up again.
Anyway, the strange thing is this, 95% of the people I have confronted have been Eastern Europeans, now I know what your gonna say, but, sorry it's just the truth, I was quite shocked by the amount, so I did some research, Google etc then I checked YouTube for bad driving, O M F G, nearly all the videos are from Eastern Europe, WTF is wrong with these people? I know they love their cars, so why try and destroy them every time they get in them.
I think they should have to take driving lessons for 3 months when they get here and then have to take a test like everyone else written and practical. So until then the lead glove and escrema/Kali sticks will have to stay in the car, for the other 5%, learn to fucking drive, morons.
Sorry eastern Europeans, your women are beautiful but, your driving is SHIT.
Exciting things are happening in the work shop, as you know I make custom one off guitars, and have had problems getting some parts that I want customised to my specification, most of these are plastic of some type, so I decided enough is enough and I have ordered a 3D printer, the 'Ender 3' should be with me in the next couple of weeks, and I am very excited, however, my enthusiasm was dampened a little when I realised that I need to learn a couple of software programs, bugger, I have a memory problem and I am waiting for a diagnosis as to whats going on, but I struggle learning new things, so having ordered my Ender 3 I did some research and found the best software to use was Tinkercad, Fusion 360 and Cura for slicing, if you don't know what I am talking about, join the club because I not sure myself.
I have watched numerous YouTube videos on all three bits of software, Tinkercad is for kids, so I thought how hard can it be, well its great, makes 3D design simple, I have designed a couple of bits for my guitars, but the problem is the next day I can't remember how I did it, so every day I have to relearn it all again and thats a bitch.
Fusion 360 is a proper 3D piece of software as far as I can see but, I don't think I will ever get to use it as my brain keeps saying 'Fuck this I am switching off' but I will keep going, and Cura is just a case of setting up an imported file for printing, I can write down the settings in a book so I don't forget them, but I am determined to have a go and try to print my custom scratch plates and knobs. Watch this space.
You would think that after 3 months away from this blog that I would have loads to write about, but the truth is work 'College Stuff' has taken up most of my time, so boring really as no one has upset me for a while. I think they have got the message? However I am now on holiday for 5 weeks, so loads can happen, you never know.
Until next time.............................
RSS Feed
